Model DHF Computerized Single-needle Quilting Machine

Main application and performances:

Due to the most advanced control software, all technical performances have been highly improved. The maximum speed is up to 2000RPM.
* The machine has been equipped with servomotors, which is more precise in stitch and quilting effect.
* The interface is available both in English and Chinese, and is easy to operate.
* The stitch length, reinforce parameters and quilting start point follow the design file; The working speed, jump speed and cloth exit point follow the machine parameters. Once the above mentioned is set, it will be memorized as set value and defaulted as parameters of next quilting process.
* The machine has the function of thread break detecting. When it is activated, the system will stop the machine automatically once the thread breaks and then restore the original position to carry out manual mend.
* Simulative display of the design quilted.
* Display of working speed, reasons for machine stop, stitch, coordinates and design file directory, etc.
* A lot of designs can be read from disk and stored in memory for a long term, which will be selected by operator.
* During the course of quilting, once occurs power cut or shut off, designs or parameters that set can still be stored in the computer, and will be continued while it is electrified.
* After the reinforce quilting parameters are set, return stitch will be realized through automatic quilting in a specified position.
* When there is a corner during the course of quilting, the quilter will reduce the speed automatically.
* Machine head and frames are allowed to move at low or high speed.
* Design selected can be previewed.

Technical data: